Domains Not Resolving

There are a few common reasons that domains do not resolve to a new server:

1. Propagation has not occurred

2. DJBDNS is stopped

3. Full partition

Contents

• Domains Not Resolving

  • Propagation Has Not Occurred

  • DJBDNS is Stopped

  • Full Partitions

Propagation Has Not Occurred

After moving a domain to a new IP, it can often take 24-49 hours for propagation to fully occur. DNS propagation may be checked with a DNS checker such as https://www.whatsmydns.net/.

DJBDNS is Stopped

1. Log in to the server at the CLI as root, either via SSH or from the terminal

2. Check the status of dbjdns

   service djbdns status
   

Full Partitions

1. Log in to the server at the CLI as root, either via SSH or from the terminal

2. Use df -h to check open space on the partitions. If any are listed at 100%, clearing space may be required

   [root@server ~]# df -h
   Filesystem                 Size  Used Avail Use% Mounted on
   devtmpfs                   903M     0  903M   0% /dev
   tmpfs                      915M     0  915M   0% /dev/shm
   tmpfs                      915M   98M  817M  11% /run
   tmpfs                      915M     0  915M   0% /sys/fs/cgroup
   /dev/mapper/centos-root    8.5G  5.8G  2.7G  69% /
   /dev/xvda1                 497M  286M  212M  58% /boot
   10.1.14.26:/home/sharedir  8.5G  5.2G  3.4G  61% /chroot/home/mountpoint
   tmpfs                      183M     0  183M   0% /run/user/250
   tmpfs                      183M     0  183M   0% /run/user/0
   [root@server ~]#